[Characteristics and Identification Priority Source of Heavy Metals Pollution in Farmland Soils in the Yellow River Basin].

Assessments of the soil environmental quality of farmland and pollution source apportionment are the foundation for ensuring national food security and agricultural sustainable development, as well as an important prerequisite for the pursuit to keep our lands clean. This study evaluated the characteristics of heavy metal pollution in farmland soils in the Yellow River Basin from 2000 to 2023, based on the data of heavy metal contents including As, Cd, Cr, Cu, Hg, Ni, Pb, and Zn, using the geo-accumulation index method. Source apportionment was conducted by employing a positive matrix factorization (PMF) model. The probabilistic health risks were evaluated by coupling Monte Carlo simulation with a human health risk assessment model, and priority pollution sources and elements were identified. The results showed that:① the average content of all heavy metals in farmland soils within the study area was lower than the screening values specified in the soil environment quality risk control standard for soil contamination of agriculture land (GB 15618-2018) (pH>7.5). However, the contents of Cd, As, and Zn in the samples exceeded their screening values, with percentages of 21.69%, 5.56%, and 1.23%, respectively, with Cd having the highest rate of exceedance. ② Hg and Cd were moderately polluted, Cu and Pb were slightly polluted, and the other elements were not polluted. ③ The main sources of heavy metals in farmland soil were traffic-industrial sources, natural-agricultural sources, industrial-natural sources, and agricultural-industrial sources, with contribution rates of 37.04%, 26.69%, 21.72%, and 14.55%, respectively. ④ Heavy metals in farmland soil posed carcinogenic health risks to adults and children but did not have non-carcinogenic risks; As and Cd were priority control elements for human health risks, and industrial-natural sources and agricultural-industrial sources were priority control sources in the study area.

Pollution and source-specific risk analysis of potentially toxic metals in urban soils of an oasis-tourist city in northwest China.

Source-specific risk apportionment for soil potentially toxic metals (PTMs) is of great significance for contamination prevention and risk management in urban environments. Eighty-five urban soil samples were obtained from an oasis-tourist city, China and examined for eight PTMs (As, Cd, Cr, Cu, Hg, Ni, Pb, and Zn). The pollution levels, sources, and ecological risk of soil PTMs were quantified, and their source-specific ecological and human health effects were also estimated using the multi-proxy approaches. The results demonstrated that accumulation of Cd, Hg, Pb, Cr, Cu, and Zn in soils was observed compared to their background levels, and the soils experienced varying degrees of PTMs pollution, especially at sites with high-intensity anthropogenic activities. Natural sources, atmospheric deposition, industrial sources, vehicular emissions, and comprehensive inputs were the principal sources, with contributions of 29.28%, 25.86%, 20.13%, 16.50%, and 8.23%, respectively. The integrated ecological risks of PTMs in soils were moderate at most sites, with atmospheric deposition being the dominant contributor to ecological risks. Children exhibited pronounced non-cancer risks, but adults had no notable non-cancer risks. Moreover, there were potential carcinogenic risks for both children and adults within the study region. Non-cancer and carcinogenic risks were more significant for children than adults, and traffic emissions were the primary contributor to non-cancer risks (adults: 20.53%, children: 20.49%) and carcinogenic risks (adults: 22.95%, children: 22.08%). The industrial and traffic activities were considered as priority control sources for soil pollution control and risk management, with Hg, Cd, Zn, and Pb corresponding to the priority elements. This study highlights the source-specific ecological and human health effects of PTMs pollution in urban soils, thereby providing valuable information for targeted pollution control and priority source management.

[Contamination Characteristics and Source Apportionment of Potentially Toxic Elements in Soil around the Coal-fired Power Plant Using APCS-MLR and PMF Models].

To investigate the characteristics and sources of potentially toxic elemental contamination in soils around the coal-fired power plant, we selected the soil around the Jingyuan power plant as the object of investigation. Thirty-six and 27 soil samples collected from the urban and farmland areas were analyzed for PTEs (As, Cd, Cr, Cu, Hg, Ni, Pb, and Zn), respectively. We employed the geoaccumulation index, single-factor pollution index, and improved Nemerow integrated pollution index to evaluate the contamination characteristics of PTEs, and combined correlation analysis with absolute principal component scores-multiple linear regression (APCS-MLR) and positive matrix factorization (PMF) receptor models were used to quantitatively analyze the pollution sources of PTEs. The results revealed that all the average concentrations of other soil metals around Jingyuan power plant exceeded their corresponding background values of Gansu Province, except for As, in agricultural soil, and Hg exhibited significant spatial non-homogeneity, and thus it was visibly affected by anthropogenic activities. The values of the single-factor pollution and geoaccumulation indices indicated that the soils of both sites were mainly contaminated with Cd, Cr, Ni, and Pb, and Hg contamination was reflected in wide areas for both sites. Additionally, the results of the improved Nemerow index demonstrated that the investigated soil was between moderately contaminated and heavily contaminated. Further, the comprehensive pollution degree of urban soil was higher than that of agricultural soil. Moreover, source apportionment revealed that PTEs in urban soil were derived from mixed sources of traffic activities and coal combustion, mixed sources of traffic activities and industrial and mining activities, and atmospheric deposition from industrial activities, with contribution rates of APCS-MLR of 35.2%, 25.1%, and 23.4%, respectively. The PMF contribution rates were 40.2%, 12.4%, and 47.7%, respectively. PTEs in agricultural soil were from one mixture source of industrial, mining, agricultural, and traffic sources, and the other mixed source was of traffic activities and coal combustion, with a APCS-MLR contribution rate of 40.3% and 35.9% and a contribution rate of PMF of 36.2% and 18.0%, respectively. In addition, another mixed source of agricultural activities and coal combustion was obtained using the PMF model, with a contribution rate of 48.5%.

Contamination, ecological-health risks, and sources of potentially toxic elements in road-dust sediments and soils of the largest urban riverfront scenic park in China.

Identifying the contamination and sources of potentially toxic elements (PTEs) in road-dust sediment (RDS) and the surrounding greenspace soil of urban environments and understanding their ecological-health risks are important for pollution management and public health. The contamination characteristics, ecological and probabilistic health risks, and source apportionment of eight PTEs (Cd, Pb, Cr, Cu, Ni, As, Zn, and Hg) in the Yellow River Custom Tourist Line of Lanzhou, which is the largest open urban riverfront scenic park in China, were investigated. The results showed that all the RDS PTE mean concentrations exceeded their soil background values, whereas for the surrounding greenspace soils, the concentrations of the PTEs, except for Cr and Ni, were also higher than their local background levels. Moreover, the RDS-soil system was mainly contaminated by Cd, Zn, Pb, Cu, and Hg to varying degrees, and the integrated ecological risks of PTEs in the RDS and soil were high and considerable at most sites, respectively. The probabilistic health risk assessment results demonstrated that the non-carcinogenic hazard risk for humans was negligible, but the total carcinogenic risks should be considered. Source apportionment using a positive matrix factorization model combined with multivariate statistical analyses revealed that Cr, Ni, and As in the RDS-soil system were from natural and industrial sources, Cd, Pb, Zn, Cu came from vehicle emissions and pesticide and fertilizer applications, and Hg was from natural and industrial sources and utilization of pesticides with fertilizers. This work provides scientific evidence for urban planning and human health protection in urban environments.

[Pollution Characteristics and Risk Assessment of Heavy Metals in Surface Dusts and Surrounding Green Land Soils from Yellow River Custom Tourist Line in Lanzhou].

In order to investigate the contamination levels of dust and its surrounding green land soil heavy metal pollution and potential ecological and health risks in the scenic areas of urban waterfront parks, the gardens, squares, and theme parks of the Yellow River Custom Tourist Line in Lanzhou were selected as the research area, using 27 dust samples and 26 soil samples from its surrounding green lands. The contamination characteristics and potential ecological risks of eight heavy metals (Cr, Ni, Cu, Zn, As, Cd, Hg, and Pb) were evaluated using the geo-accumulation index (Igeo), single-factor pollution index (Pi), Nemerow integrated pollution index (PN), and improved potential ecological risk index (RI). The human health risk assessment was also evaluated using the exposure risk model. The results showed that the average concentrations of the other heavy metals in the surface dusts were higher than the background values of Gansu Province and Lanzhou City, except that the As mean concentrations in the surface dusts and the surrounding green land soils were slightly lower than the Gansu Province background values. For its surrounding green land soils, the mean concentrations of the other heavy metals (Cu, Zn, Cd, Hg, and Pb) exceeded the soil background values of Gansu Province and Lanzhou City, whereas the Cr and Ni mean concentrations were lower than their corresponding soil background values of Gansu Province and Lanzhou City. The geo-accumulation and single-factor pollution indices demonstrated that a slight to moderate pollution of Cr, Cu, Zn, Cd, Hg, and Pb occurred in surface dusts, and Cu, Zn, Cd, Hg, and Pb appeared in varying degrees of contamination levels in its surrounding green land soils. The Nemerow integrated pollution index analysis manifested that the overall contamination status of the study areas was between slightly and heavily polluted. The potential ecological risk index suggested that Cd and Hg were recognized as significant pollutant elements and that the RI of the other heavy metals were all below 40, presenting slight ecological risk. The health risk assessment indicated that ingestion was the dominant exposure pathway for heavy metals from the surface dusts and the surrounding green land soils, and no carcinogenic and noncarcinogenic risks posed threats to adults and children.

Inoculation of Exogenous Complex Bacteria to Enhance Resistance in Alfalfa and Combined Remediation of Heavy Metal-Contaminated Soil.

Heavy metals are considered to be one of the main sources of soil contamination. In this study, three tolerant bacteria were isolated from the heavy metal-contaminated soil in mining area, and immobilized bacteria were constructed using corn straw as the carrier. The combined remediation effect of immobilized bacteria and alfalfa in pot experiments was explored in heavy metal-contaminated soil. Under heavy metal stress, inoculation with immobilized bacteria significantly promoted the growth of alfalfa, in which the dry weights of roots, stems, and leaves increased by 19.8, 6.89, and 14.6%, respectively (P < 0.05). Also, inoculation with immobilized bacteria improved the antioxidant capacity of plants and the activity of soil enzymes and improved soil quality (P < 0.05). Microbial-phytoremediation technology effectively reduced the heavy metal content in the soil, and can restore the soil contaminated by heavy metals. The results will help to further understand the mechanism of microbial inoculation to reduce the toxicity of heavy metals, and provide guidance for the cultivation of forage grasses in heavy metal-contaminated soils.

Effect of composted pig manure, biochar, and their combination on antibiotic resistome dissipation in swine wastewater-treated soil.

The prevalence of antibiotic resistance genes (ARGs), owing to irrigation using untreated swine wastewater, in vegetable-cultivated soils around swine farms poses severe threats to human health. Furthermore, at the field scale, the remediation of such soils is still challenging. Therefore, here, we performed field-scale experiments involving the cultivation of Brassica pekinensis in a swine wastewater-treated soil amended with composted pig manure, biochar, or their combination. Specifically, the ARG and mobile genetic element (MGE) profiles of bulk soil (BS), rhizosphere soil (RS), and root endophyte (RE) samples were examined using high-throughput quantitative polymerase chain reaction. In total, 117 ARGs and 22 MGEs were detected. Moreover, we observed that soil amendment using composted pig manure, biochar, or their combination decreased the absolute abundance of ARGs in BS and RE after 90 days of treatment. However, the decrease in the abundance of ARGs in RS was not significant. We also observed that the manure and biochar co-application showed a minimal synergistic effect. To clarify this observation, we performed network and Spearman correlation analyses and used structure equation models to explore the correlations among ARGs, MGEs, bacterial composition, and soil properties. The results revealed that the soil amendments reduced the abundances of MGEs and potential ARG-carrying bacteria. Additionally, weakened horizontal gene transfer was responsible for the dissipation of ARGs. Thus, our results indicate that composted manure application, with or without biochar, is a useful strategy for soil nutrient supplementation and alleviating farmland ARG pollution, providing a justification for using an alternative to the common agricultural practice of treating the soil using only untreated swine wastewater. Additionally, our results are important in the context of soil health for sustainable agriculture.

Microbiological inoculation with and without biochar reduces the bioavailability of heavy metals by microbial correlation in pig manure composting.

Biochar provides a suitable microenvironment for the growth of microorganisms. It may directly or indirectly affect changes in the population of microorganisms, thus affecting heavy metal bioavailability. This study aims to explore the effects of microbiological inoculation with and without biochar on microorganisms and on the bioavailability of heavy metals during pig manure composting. Three composting experiments were conducted under various conditions including no treatment (CK), only microbiological inoculation (TA), and integration with biochar (TB). Compared with raw materials before compost, TA reduced the bioavailability of Cu by 25.1%, Zn by 25.64%, and both Pb and Cr by 1.75%. TB reduced the bioavailability of Cu by 35.38%, Zn by 19.34%, Pb by 0.81%, and Cr by 3.9%. Furthermore, correlation analysis demonstrated that Debaryomyces were the primary fungi, possibly controlling the passivation of Cr. Bacillus, Fusarium, Pseudogracilibacillus, Sinibacillus, and Botryotrichum were the primary bacteria and fungi potentially governing the passivation of Zn, Lastly, Debaryomyces and Penicillium were the primary bacteria and fungi potentially controlling the passivation of Pb and Cu, respectively. Overall, we demonstrated that pig manure added to the microbial inoculum and biochar effectively reduced the bioavailability of heavy metals, thereby offering an applicable technology for reducing heavy metal contamination during pig manure composting.

Efficient degradation of hydroquinone by a metabolically engineered Pseudarthrobacter sulfonivorans strain.

Pseudarthrobacter sulfonivorans strain Ar51 can degrade crude oil and multi-substituted benzene compounds efficiently at low temperatures. However, it cannot degrade hydroquinone, which is a key intermediate in the degradation of several other compounds of environmental importance, such as 4-nitrophenol, g-hexachlorocyclohexane, 4-hydroxyacetophenone and 4-aminophenol. Here we co-expressed the two subunits of hydroquinone dioxygenase from Sphingomonas sp. strain TTNP3 with different promoters in the strain Ar51. The strain with 2 hdnO promoters exhibited the strongest hydroquinone catabolic activity. However, in the absence of antibiotic selection this ability to degrade hydroquinone was lost due to plasmid instability. Consequently, we constructed a hisD knockout strain, which was unable to synthesise histidine. By introducing the hisD gene onto the plasmid, the ability to degrade hydroquinone in the absence of antibiotic selection was stabilised. In addition, to make the strain more stable for industrial applications, we knocked out the recA gene and integrated the hydroquinone dioxygenase genes at this chromosomal locus. This strain exhibited the strongest activity in catabolizing hydroquinone, up to 470 mg/L in 16 h without antibiotic selection. In addition, this activity was shown to be stable when the strain has cultured in medium without antibiotic selection after 20 passages.

Effects of heavy metals on bacterial community surrounding Bijiashan mining area located in northwest China.

Heavy metal (HM) pollution is a severe and common environmental problem in mining area soil. It is imperative to understand the micro ecological characteristics of mining area soil for HM contaminated soil remediation. This study described the effects of HM pollution level and soil physical and chemical parameters on microbial diversity. In this study, high-throughput sequencing technology was used to study the effects of HM pollution on the diversity and composition of the soil microbial community. The soil groups were barren, exhibiting alkaline pH, low total nitrogen (TN), and total potassium (TK) according to soil fertility standard. Compared with the control group, there was severe multiple HM pollution in the other five groups, including lead (Pb), cadmium (Cd), zinc (Zn), and copper (Cu). The dominant phyla accounting for more than 1% of the overall community in all soil groups were Proteobacteria (34.432 ± 7.478%), Actinobacteria (22.947 ± 4.297%), Acidobacteria (10.47 ± 2.439%), Chloroflexi (7.89 ± 2.980%), Planctomycetota (5.993 ± 1.558%), Bacteroidota (4.275 ± 1.980%), Cyanobacteria (3.478 ± 2.196%), Myxococcus (2.888 ± 0.822%), Gemmatimonadota (2.448 ± 0.447%), Firmicutes (1.193 ± 0.634%), Patescibacteria (0.435 ± 0.813%), and Nitrospirota (0.612 ± 0.468%). Proteobacteria and Actinobacteria were predominant at the phylum level, which showed a certain tolerance to HMs. In addition, redundancy analysis (RDA) results showed that Pb, Cu, Zn, and Cd were strongly correlated with each other (P < 0.01). Other nutrient elements (except for TK) were significantly positively correlated with each other. Cu and nutrient element TK had an important impact on bacterial community structure. Therefore, bacteria with the function of HM tolerance and bioremediation in extreme environments should be researched, which provides a foundation for future ecological remediation of contaminated soil by using microbial remediation technology.

Planococcus lenghuensis sp. nov., an oil-degrading bacterium isolated from petroleum-contaminated soil.

A Gram-staining-positive and aerobic coccus with the ability to degrade petroleum bacterium, designated Y42T, was isolated from the Lenghu oil field located in the northern margin of the Qaidam Basin. Phylogenetic and signature nucleotides analyses revealed that strain Y42T belongs to the genus Planococcus. The multiple sequence alignments of 16S rRNA and housekeeping genes showed that strain Y42T formed a distinct lineage with the other Planococcus clade. The average nucleotide identity (ANI) and DNA-DNA hybridization values (DDH) between strain Y42T and the reference strains were 69.5-70.1 and 19.4-21.7%, respectively, which values were below the threshold for species delineation. The major fatty acids of strain Y42T were anteiso-C15:0. The respiratory quinone was MK-7 (71.8%) as the predominant menaquinone followed the MK-6 (28.2%) and the cell-wall hydrolysates contained LL-diaminopimelic acid. The polar lipid was composed of diphosphatidyl glycerol, phosphatidyl glycerol, phosphoglycolipid, aminophospholipid and four unidentified lipids. The peptidoglycan type was A4α (L-Lys-D-Glu). The strain Y42T possessed larger genome (approximately 4 MB) and revealed obvious differences for the abundance of the COG categories compared with the other Planococcus bacteria. Also, the strain Y42T also possessed more unique orthologous proteins. The structural characteristics of the strain Y42T genome provided a competitive advantage for better survival in petroleum-polluted environments. Combined with the 16S rRNA gene and genome sequence, phenotypic as well as chemotaxonomic characterisations, strain Y42T is considered to represent a novel species of the genus Planococcus, for which the name Planococcus lenghuensis sp. nov. be proposed. The type strain is Y42T (= CGMCC 1.15921T = JCM 32719T).

Variation in Actinobacterial Community Composition and Potential Function in Different Soil Ecosystems Belonging to the Arid Heihe River Basin of Northwest China.

Actinobacteria are known for their metabolic potential of producing diverse secondary metabolites such as antibiotics. Actinobacteria also playimportant roles in biogeochemical cycling and how soils develop. However, little is known about the effect of the vegetation type on the actinobacterial community structures in soils from arid regions. For these reasons, we have analyzed the actinobacterial communities of five types of ecosystem (tree grove, shrub, meadow, desert, and farm) in the Heihe river basin. Using 16S rRNA high-throughput sequencing, we found 11 classes of Actinobacteria, with dominant classes of Actinobacteria (36.2%), Thermoleophilia (28.3%), Acidimicrobiia (19.4%). Five classes, 15 orders, 20 families and 36 genera were present in all samples. The dominant generalist genera were Gaiella, Solirubrobacter, Nocardioides, Mycobacterium, and Pseudonocardia. The actinobacterial community structures were significantly affected by the environment and vegetation type. The diversity of the actinobacterial community in the desert ecosystem was high, and this ecosystem harbored the highest proportion of unclassified sequences, representing rare Actinobacteria. Functional metagenomic prediction, using PICRUSt, indicated that Actinobacteria play an important role in nitrogen cycling in both desert and cultivated farm ecosystems.

Variations in culturable bacterial communities and biochemical properties in the foreland of the retreating Tianshan No. 1 glacier

Abstract As a glacier retreats, barren areas are exposed, and these barren areas are ideal sites to study microbial succession. In this study, we characterized the soil culturable bacterial communities and biochemical parameters of early successional soils from a receding glacier in the Tianshan Mountains. The total number of culturable bacteria ranged from 2.19 × 105 to 1.30 × 106 CFU g-1 dw and from 9.33 × 105 to 2.53 × 106 CFU g-1 dw at 4 °C and 25 °C, respectively. The number of culturable bacteria in the soil increased at 25 °C but decreased at 4 °C along the chronosequence. The total organic carbon, total nitrogen content, and enzymatic activity were relatively low in the glacier foreland. The number of culturable bacteria isolated at 25 °C was significantly positively correlated with the TOC and TN as well as the soil urease, protease, polyphenoloxidase, sucrase, catalase, and dehydrogenase activities. We obtained 358 isolates from the glacier foreland soils that clustered into 35 groups using amplified ribosomal DNA restriction analysis. These groups are affiliated with 20 genera that belong to six taxa, namely, Alphaproteobacteria, Betaproteobacteria, Gammaproteobacteria, Actinobacteria, Bacteroides, and Deinococcus-Thermus, with a predominance of members of Actinobacteria and Proteobacteria in all of the samples. A redundancy analysis showed that the bacterial succession was divided into three periods, an early stage (10a), a middle stage (25-74a), and a late stage (100-130a), with the total number of culturable bacteria mainly being affected by the soil enzymatic activity, suggesting that the microbial succession correlated with the soil age along the foreland.

Variations in culturable bacterial communities and biochemical properties in the foreland of the retreating Tianshan No. 1 glacier.

As a glacier retreats, barren areas are exposed, and these barren areas are ideal sites to study microbial succession. In this study, we characterized the soil culturable bacterial communities and biochemical parameters of early successional soils from a receding glacier in the Tianshan Mountains. The total number of culturable bacteria ranged from 2.19×105 to 1.30×106CFUg-1dw and from 9.33×105 to 2.53×106CFUg-1dw at 4°C and 25°C, respectively. The number of culturable bacteria in the soil increased at 25°C but decreased at 4°C along the chronosequence. The total organic carbon, total nitrogen content, and enzymatic activity were relatively low in the glacier foreland. The number of culturable bacteria isolated at 25°C was significantly positively correlated with the TOC and TN as well as the soil urease, protease, polyphenoloxidase, sucrase, catalase, and dehydrogenase activities. We obtained 358 isolates from the glacier foreland soils that clustered into 35 groups using amplified ribosomal DNA restriction analysis. These groups are affiliated with 20 genera that belong to six taxa, namely, Alphaproteobacteria, Betaproteobacteria, Gammaproteobacteria, Actinobacteria, Bacteroides, and Deinococcus-Thermus, with a predominance of members of Actinobacteria and Proteobacteria in all of the samples. A redundancy analysis showed that the bacterial succession was divided into three periods, an early stage (10a), a middle stage (25-74a), and a late stage (100-130a), with the total number of culturable bacteria mainly being affected by the soil enzymatic activity, suggesting that the microbial succession correlated with the soil age along the foreland.

Diversity of crude oil-degrading bacteria and alkane hydroxylase (alkB) genes from the Qinghai-Tibet Plateau.

The aim of this study was to survey the response of the microbial community to crude oil and the diversity of alkane hydroxylase (alkB) genes in soil samples from the Qinghai-Tibet Plateau (QTP). The enrichment cultures and clone libraries were used. Finally, 53 isolates and 94 alkB sequences were obtained from 10 pristine soil samples after enrichment at 10 °C with crude oil as sole carbon source. The isolates fell into the phyla Proteobacteria, Actinobacteria, and Bacteroidetes, with the dominance of Pseudomonas and Acinetobacter. The composition of degraders was different from polar habitats where Acinetobacter sp. is not a predominant responder of alkane degradative microbial communities. Phylogenetic analysis showed that the alkB genes from isolates and enrichment communities formed eight clusters and mainly related with alkB genes of Pseudomonas, Rhodococcus, and Acinetobacter. The alkB gene diversity in the QTP was lower than marine environments and polar soil samples. In particular, a total of 10 isolates exhibiting vigorous growth with crude oil could detect no crude oil degradation-related gene sequences, such as alkB, P450, almA, ndoB, and xylE genes. The Shannon-Wiener index of the alkB clone libraries from the QTP ranged from 1.00 to 2.24 which is similar with polar pristine soil samples but lower than that of contaminated soils. These results indicated that the Pseudomonas, Acinetobacter, and Rhodococcus genera are the candidate for in situ bioremediation, and the environment of QTP may be still relatively uncontaminated by crude oil.

Induction of a high-yield lovastatin mutant of Aspergillus terreus by ¹²C6⁺ heavy-ion beam irradiation and the influence of culture conditions on lovastatin production under submerged fermentation.

Heavy-ion beams, possessing a wide mutation spectrum and increased mutation frequency, have been used effectively as a breeding method. In this study, the heavy-ion beams generated by the Heavy-Ion Research Facility in Lanzhou were used to mutagenize Aspergillus terreus CA99 for screening high-yield lovastatin strains. Furthermore, the main growth conditions as well as the influences of carbon and nitrogen sources on the growth and the lovastatin production of the mutant and the original strains were investigated comparatively. The spores of A. terreus CA99 were irradiated by 15, 20, 25, and 30 Gy of 80 MeV/u (12)C(6+) heavy-ion beams. Based on the lovastatin contents in the fermentation broth, a strain designated as A. terreus Z15-7 has been selected from the clone irradiated by the heavy-ion beam. When compared with the original strain, the content of lovastatin in the fermentation broth of A. terreus Z15-7 increased 4-fold. Moreover, A. terreus Z15-7 efficiently used the carbon and nitrogen sources for the growth and production of lovastatin when compared to the original strain. The maximum yield of lovastatin, 916.7 µg/ml, was obtained as A. terreus Z15-7 was submerged cultured in the chemically defined medium supplemented with 3% glycerol as a carbon source, 1% corn meal as an organic nitrogen source, and 0.2% sodium nitrate as an inorganic nitrogen source at 30 °C in the shake flask. The result shows that heavy-ion beam irradiation is an effective method for the mutation breeding of lovastatin production of A. terreus.